Editing a Mix
In this section, we will assign Programs to and set volume levels for the 16 MIDI
channels in a Mix, for playing back tracks from a MIDI sequencer. However, there is
much more about a Mix that may be edited. Refer to Chapter 5 for more about Mix
editing.
¿
Press [MIX] and select a Mix using one of the three methods described above.
¡
Press [SELECT].
The top line of the LCD's function list will read "EDITING: MIX".
¬
Simultaneously press both the FUNCTION [¨] and [Æ] buttons.
MIDI
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
CHAN
MIX
PRESET
EDITING:
PROGRAM – ASSIGN
PITCH
PAGE: 1
÷
Use the MIDI [¨] and [Æ] buttons to select a MIDI channel for editing.
The MIDI monitor and selection strip will indicate the selected MIDI channel with
an underline. These buttons "wrap around" (e.g., if you're on channel 16 and
press MIDI [Æ] , you'll select channel 1. If channel 1 is selected and you press
MIDI [¨] , you'll select channel 16).
ƒ
Use Quad Knob [1] to choose a Bank (User, Preset 1 – 4).
ª
Use Quad Knob [2] to select a Program for the selected Channel.
D
Use Quad Knob [4] to enable or disable the Program on the selected Channel.
When enabled, the Channel number will appear in the top left of the display.
When disabled, the Channel number will not appear (unless selected for editing
using the MIDI [¨] and [Æ] buttons, in which case it is underlined) .
«
To set the Program's level, press the FUNCTION [Æ] button once so that
"LEVEL" is underlined in the display. Use Quad Knob [1] to adjust the level.
»
Repeat steps
channels, and have the appropriate levels.
Changes to Mix parameters are temporary and will be lost if another Mix is selected.
J
To make changes permanent, you must store the Mix into the User bank. Refer to
Chapter 4 for information about storing changes.
S4 Plus Reference Manual
PROG
EFFECT
PRESET
PRESET
MIX
LEVEL
EFFECT–LEVEL
RANGE
EFFECT
NAME
¬
«
—
until all desired Programs are assigned to all desired MIDI
Your First Session With The S4 Plus: Chapter 2
17
Need help?
Do you have a question about the S4 Plus and is the answer not in the manual?