Alesis 2 User Manual page 53
Micro series
Hide thumbs
Also See for 2:
- Reference manual (103 pages) ,
- Setting up (12 pages) ,
- Instruction manual (6 pages)
Advertisement
MICRO CUE AMP cont'd
receive. The left-hand Input 2 control determines the level for the
Out t headphone jack.
The right-hand tnput 2 control determines the level for the Out 2
headphone jack.
The MICRO CUE AMP features 2 separate headphone output
jacks, each with independent level control over inputs 1 and 2.
Out 1 is a stereo headphone output with the volume controlled by
the left Input 1 and Input 2 controls.
Out 2 is a stereo headphone output with the volume controlled by
the right Input 1 and Input 2 controls.
The green LED indicates that the unit is on.
The Input 1 Jacks on the back panel are a stereo iack which can
be used for connection to the stereo auxiliary sends of a mixing
console, or used as an input for an instrument such as guitar or
keyboard for private practicing.
The lnput 2 Jacks on the back panel are a stereo jack which can
be used for connection to the stereo auxiliary sends of a mixing
console, or used as an input for an instrument such as guitar or
k eyboard for pr ivate pr acti cing . T h e I n pu t 2 Jack i s a lso
paralleled with the Stereo Line Out Jack for chaining additional
MICRO CUE AMPS together.
Stereo Line Out is used for chaining additional MICRO CUE
AMP units together. Only the signal applied to Input 2 is
available at the Stereo Line Out.
Operation
After connecting your MICRO CUE AMP (refer to the section on
installation), simply insert your headphones into either Out 1 or
Out 2 on the front panel, and turn the Input 1 and/or Input 2
control until the desired headphone volume is reached. MICRO
CUE AMP will adequately drive any set of headphones, either low
(8 ohms) or high (600 ohms) impedance.
50
Advertisement
Need help?
Do you have a question about the 2 and is the answer not in the manual?